Model CES 7050
CES Model 7050PLC Trainer
backhome

 

 

 

 

 

 

 


The CES 7050 Programmable Logic Controller Trainer allows the student to devlop skills needed for todays fast paced field of process automation. The PLC trainer has discrete I/O and a serial connection to the PC Software which operates on the PC for the support of the PLC.

The student will learn about ladder logic programming, and develop logic, download, upload, debug, and troubleshoot PLC logic programs. A full set of logic commands are available for the user, with the basic if/and/or capabilities (normally open and normally closed) logic elements being primarily used. Timers and counters will also be extensively used.

The Human Interface (HMI) software will be used for the development and debug of HMI components addressed to the PLC. After mastering the concepts involved in relating PLC logic addresses to HMI graphic element address, the learner will functionally replace the hardware push buttons and panel lights on the trainer with the HMI versions of these control
elements. Very basic graphical element development will be accomplished by the student. In a culminating lab experience, the student will be furnished with a full HMI representation of the trainer, and will be required to furnish HMI I/O addressing.
Jobs on the trainer can then be executed and the trainer will operate with a HMI graphic representation of the trainer functioning as well.
 
Lesson 1 - What is industrial automation?
Lesson 2 - What is a PLC and how can it control a trainer?
Lesson 3 - How do you download and run a PLC program?
Lesson 4 - How do you write a PLC program?
Lesson 5 - What are the inputs, and outputs and how do we identify (address) them?
Lesson 6 - What are NO (normally open) and NC (normally closed) logic elements?
Lesson 7 - Can you build a traffic light?
Lesson 8 - How do timers work?
Lesson 9 - Can you make lights flash in sequences and patterns?
Lesson 10 - What is a counter?
Lesson 11 - What are air cylinders and pneumatic control valves?
Lesson 12 - What is a photo-prox switch?
Lesson 13 - Call you build a clamping sequence?
Lesson 14 - What is a numeric display?
Lesson 15 - What is a human-machine interface (HM!)?
Lesson 16 - How do you tie the HMI to the PLC?
Lesson 17 - How do you create buttons and lights on an HMI?
Lesson 18 - Can you control the clamping sequence from the HMI?
Lesson 19 - Can you build a traffic light display on the HMI?
Lesson 20 - Can you build on operator's station for the trainer using all HMI?

Click here to download the complete data sheet on the Model CES 7050 PLC Trainer

The above datasheet on the Model CES Ed-Lab 7050 PLC Trainer requires Adobe Acrobat Reader. If you do not have Acrobat installed on your computer, click here to download Adobe Acrobat Reader